Arona Premium has walls and ceiling thoroughly insulated with rock wool (75 mm), which ensures that the room gets hot quickly and retains heat longer, even on the coldest winter nights. The interior and exterior finishes are in thermo-malleable wood, and interior details can be chosen from other material options.
Choose from an electric or wood-burning stove - depending on whether you prefer a quick and clean solution or a traditional baking experience.
The sauna will need to be connected to electricity - both for the electrical circuit and for the LED lighting. For the electric coil, depending on the model, an industrial power supply may be required.
A ceiling light in front of the sauna door makes it easy to enter even at dusk.
The design has avoided visible trims and unaesthetic angles. All joints are straight, strong and finished. The result is a clean, modern and Nordic look.
Assembly is logical and manageable - the instructions say it takes 3-5 hours. If desired, the sauna can also be ordered with a professional installation service.
Can be transported in one piece if access allows. Installed in separate panels if required.
Panel assembly takes approximately 3-5 hours on a finished substrate. Supplied with detailed instructions.
The customer can also request a professional installation.
Suitable for installation on a flat base: terrace, cast slab or blocks. Modular sauna weight: approx. 1100 kg.
Delivery time in Estonia 4-8 weeks. Transport to foreign countries by land or by container 1,5 - 3 months.
No separate building permit is required in Estonia. For other countries, depends on local legislation.
Aspen
Alder
Thermo aspen
Thermo Alder
Arona is designed for those seeking a more spacious, deeply relaxing sauna experience. Its dimensions allow up to four people to enjoy the sauna experience at the same time - and with more space comes more freedom to choose the right heater for you.
The Arona sauna is suitable for both wood-burning stoves and electric stoves.
We have a carefully tested range of stoves to help you find the right one for your sauna, rhythm and aesthetic. Whatever your choice, the end result is always the same: the perfect temperature, tranquillity and a relaxing moment.
Open water heater (stainless steel) with tap around flue; capacity 30 litres.
Flue pipe set: two-wall, one-wall; rubber grommet, clamps; 2,4 metres
The steel chimney can withstand large temperature fluctuations and is intended for use primarily in separate sauna buildings with trap stoves, smaller fireplaces and chimney-pipes.
The steel chimney starter pack contains: a 1.5 m steel chimney (WHP1500) and a box of accessories including a 1.0 m uninsulated flue pipe, a rain cap, a rubber rain cap and rain cap mounting kit, a stainless steel duct cap and a steel chimney duct insulation and safety cap. The steel chimney can be easily extended with 0,5 (WHP500) and 1,0 (WHP1000) meter long accessories. Thanks to an ingenious mechanism, the accessories are screwed together and the flue tubes are also interlocked thanks to grooves in the tube. This prevents movement due to temperature variations. Indoors, the chimney can be installed at a height of 3 metres without support, and outdoors at 2 metres.
The nominal flue gas temperature of a Harvia steel flue connected to a Harvia steel flue shall not exceed. 600 ºC. The outer diameter of the steel flue is 220 mm and the diameter of the flue pipe is 115 mm. The safety distance of the steel stack from combustible materials is 100 mm. The Harvia steel grate is CE-marked and therefore complies with international fire and safety requirements. The steel chimney is soot-resistant.
Carefully read the instructions for installation and use of the steel basket and the connected heater.
Colour: Steel
Width (mm): 220
Height (mm): 1500
Smoke opening diameter (mm): 115
