STAINLESS STEEL MODULAR CHIMNEYS FOR HEATERS

A stylish chimney solution that withstands large temperature fluctuations and is primarily intended for use with wood-burning stoves, smaller fireplaces, and fireplace inserts in freestanding sauna buildings.

The steel chimney package includes: a 1.5-meter steel chimney and an accessory box containing a 1.0-meter uninsulated flue pipe, a rain cap, a rubber rain collar and a rain collar installation kit, a stainless steel roof penetration collar, and insulation and a safety collar for the steel chimney penetration. The steel chimney can be easily extended with 0.5- and 1.0-meter extension sections. Thanks to an ingenious mechanism, the extension sections screw together, and the flue pipes also lock into place with each other thanks to the grooves in the pipes. This prevents movement caused by temperature fluctuations. Indoors, the chimney can be installed up to 3 meters high without support, and outdoors, the maximum height is 2 meters.

The nominal temperature of the flue gases from a fireplace connected to a steel chimney must not exceed 600 ºC. The outer diameter of the steel chimney is 220 mm, and the diameter of the flue pipe is 115 mm. The safety distance between the steel chimney and combustible materials is 100 mm. The steel chimney bears the CE mark, indicating that the product complies with international fire and safety requirements. The steel chimney is soot-resistant.

Carefully read the instructions for installation and use of the steel basket and the connected heater.

Colour: Steel
Width (mm): 220
Height (mm): 1500
Smoke opening diameter (mm): 115